Channel Lock Pliers:
Pipe Style Channel Lock design for gripping round pipe

CLVJ095

9 1/2”  OAL
1 1/2” jaw capacity
grabs 1/2” up to 1 1/4” pipe

$12.99

CLVJ120

12” OAL
2 1/4” jaw capacity
grabs 1/2” up to 2” pipe

$15.50

Drip Emitter Tubing Hole Punch: for installing emitters and drip valves in poly tubing

AWE-HPKP

Plastic hand held hole punch
punches 0.120” dia holes in thin wall mainline drip tubing for connection of emitters directly into tubing

$0.65

AWE-HP

Specialty Hole Punch
effortlessly creates proper size burr free holes in poly tubing for drip emitters or drip valves

$26.00

Low Pressure Gauges:
Use on central Air Pumps and Regenerative Blowers. Protect your pump from damage by keeping tabs on how much pressure is in your pipe system thereby allowing you to bleed excess air. Can save electricity by operating Air system at optimal pressure for your air pump or Blower. A proper gauge where operating pressure falls in center of gauge dial. Do not use a gauge with higher range than full rating of your pump.
 

PGABM014-0100

LOW PRESSURE GAUGE
0-100” water column/ 0-25 kpa
2.5” dial with back mount 1/4 NPT connection. Tested, good accuracy as required for our low pressure air pumps

$20.00

PGDMNH-0100IW

0-100” in H2O

LOW PRESSURE GAUGE
0-100” (0-3.61 PSI)
Accurate Gauge graduated in inches of water column for easy indication of comparative air pressure

2 7/8” diameter nylon body Gauge fitted with 3/16” barb back connection for use with flex tubing. Barb  and tubing also available to connect gauge to your PVC pipe distribution system or pre-built manifold.
FOR AIR ONLY

CALL

PGDMGH-0100IW

LOW PRESSURE GAUGE
0-100” water column
Large Professional Series 4”
1/8 NPT ports

CALL

REGULAR SERIES GAUGES
FOR MEDIUM HIGH HEAD WATER PUMPS AND HIGH PRESSURE AIR SYSTEMS

PGDS-1/4-015

Pressure Gauge
0-15 PSI
side mount 1/4” NPT fitting
Used for water pumps or low pressure water drip systems

$5.95

PGDS-1/4-030

Pressure Gauge
0-30 PSI
side mount 1/4” NPT fitting
Used for high head water pumps

$5.95

PGDSL-1/4-015

Liquid Filled Pressure Gauge
0-15 PSI
side mount 1/4” NPT fitting
Used for water pumps or low pressure water drip systems

$14.95

PGDSL-1/4-030

Liquid Filled Pressure Gauge
0-30 PSI
side mount 1/4” NPT fitting
Used for high head water pumps

$14.95